XYLANH XOAY – Rotary Actuators 

Rotary Actuators come in two types, Rack and Pinion and Vane style. When the application calls for rotational motion less than one revolution, rotary cylinders can mount right at the equipment joint without taking up space with long stroke lengths, which would be required to do the same job with a linear cylinder. SMC’s pneumatic rotary actuator units can achieve arc lengths of 90°, 180°, 190°, or even 270°, depending on the configuration. 

Rotary Actuators – Rack and Pinion

Rotary Actuators – Vane Type

Rotary Actuators – Combination

NC(D)RA1-Z, Rotary Actuator, Rack & Pinion

The NCRA1 series is a rack & pinion rotary actuator, which offers very high torque-to-size and accurate positioning. Rail type mounting allows switch position to be easily adjusted. Bore sizes available include 30, 50, 63, 80 and 100mm. Single rod end or double rod end models are available.

• Rack and pinion type rotary actuator
• Single or double rod end available
• Bore sizes: 50mm ~ 100mm
• Mounting types: basic
• Auto switch capable

Configuration Options

	Part Number is Partial
NC    RA1 B       –       Z

Copy Configuration Number

Compliance: ______
*Updated Weekdays at 6am Eastern

Product Options

Select Product Options

Select values from the drop down lists or make appropriate selections to configure the part number.
Specification	— Pick an Option — NC (North American Specification)
Magnet	— Pick an Option — None  D (Built-in Magnet)
Mounting	— Pick an Option — B (Basic Type)
Shaft	— Pick an Option — S (Single Shaft)  W (Double Shaft)
Size	— Pick an Option — 30mm  50mm  63mm  80mm  100mm
Rotating Angle	— Pick an Option — 90°  100°  180°  190°
Air Cushion	— Pick an Option — None  C (w/Air Cushion)
Auto Switch	— Pick an Option — No Switch  M9B–Solid State, Gen. Purpose, 2 Wire, Horizontal  M9BV–Solid State, Gen. Purpose, 2 Wire, Vertical  M9BW–Solid State, 2-color Indication, 2 Wire, Horizontal  M9BWV–Solid State, 2-color Indication, 2 Wire, Vertical  M9N–Solid State, Gen. Purpose, 3 Wire NPN, Horizontal  M9NV–Solid State, Gen. Purpose, 3 Wire NPN, Vertical  M9NW–Solid State, 2-color Indication, 3 Wire NPN, Horizontal  M9NWV–Solid State, 2-color Indication, 3 Wire NPN, Vertical  M9P–Solid State, Gen. Purpose, 3 Wire PNP, Horizontal  M9PV–Solid State, Gen. Purpose, 3 Wire PNP, Vertical  M9PW–Solid State, 2-color Indication, 3 Wire PNP, Horizontal  M9PWV–Solid State, 2-color Indication, 3 Wire PNP, Vertical  A90–Reed, AC Volt, Horizontal  A90V–Reed, DC Volt, AC Volt, Vertical  A93–Reed, DC Volt, AC Volt, LED, Horizontal  A93V–Reed, DC Volt, AC Volt, LED, Vertical  A96–Reed, DC Volt, LED, Horizontal  A96V–Reed, DC Volt, LED, Vertical
Lead Wire or Prewired Connector	— Pick an Option — 0.5m (Or None in the Case of No Switch)  M (1m)  L (3m)  Z (5m)  SAPC (0.5m Cord Length, M8-3 Pin Connector)  SBPC (0.5m Cord Length, M8-4 Pin Connector)  SDPC (0.5m Cord Length, M12-4 Pin Connector)  MAPC (1.0m Cord Length, M8-3 Pin Connector)  MBPC (1.0m Cord Length, M8-4 Pin Connector)  MDPC (1.0m Cord Length, M12-4 Pin Connector)
Number	— Pick an Option — 2 pcs. (Or None in the Case of No Switch)  S (1 pc.)
	Options in: Gray are not compatible with other selected option value. Red conflict with another selected option value. Amber are not recommended.